If your gas grill has rusted burners, uneven flames, or an igniter that no longer clicks, a replacement burner kit can often bring it back to working order without buying a new grill. These kits usually bundle burners, heat plates (also called heat tents or heat shields), crossover tubes, and sometimes grates or igniters. The most important step is matching the kit to your exact grill model, because burner length and burner count vary from one family to another. The five kits below cover Charbroil, KitchenAid, and Charbroil Advantage grills, and the buying guide explains how to check fit before you order.
Quick Comparison
| Kit | Burner Count | Main Materials | What Is Included | Best For |
|---|---|---|---|---|
| Yuflame Charbroil Performance 5-Burner Parts Kit | 5 burners | Stainless steel burners and heat tents, cast iron grates | 3 grates, 5 heat tents, 5 burners, 5 cotter pins, 2 igniters | A full rebuild of a 5-burner Charbroil Performance grill |
| Uniflasy KitchenAid 4-Burner Grill Parts Kit | 4 burners | Stainless steel burners and heat plates | 4 burners, 4 heat plates, 4 igniter electrodes, hardware screws | KitchenAid 4-burner gas grills |
| Direct Store DG101 Charbroil Parts Kit | 4 burners | Stainless steel burners and tubes, porcelain steel heat plates | 4 burners, 4 heat plates, 3 carryover tubes | Charbroil owners who want a long list of cross-referenced models |
| Criditpid Charbroil Performance Replacement Parts | Multiple models (4, 5, and 6 burner listed) | Stainless steel heat tent and burner tube | Heat tent, burner tube, crossover tube, burner brace, temperature gauge part | Targeted repairs across several Charbroil families |
| Direct Store DG272 Charbroil Advantage Replacement Kit | 4 burners | Stainless steel burner and heat plate | 4 burners, 4 heat plates, 2 igniters, 3 crossover tubes | Charbroil Advantage 4-burner grills |
Our Picks: Best gas grill burner kits reviews
Yuflame 5-Burner Kit: Best for a Full Charbroil Rebuild
The Yuflame kit is the most complete option in this roundup, aimed at 5-burner Charbroil Performance grills. It includes three cast iron cooking grates, five stainless steel burners, five heat tents, cotter pins, and two igniters. That means you can replace grates and burner components in one order instead of sourcing them separately.
The listing names the original part numbers it replaces, which helps when you are comparing against a worn part. Because the grates come in one narrow and two larger sizes, the listing advises checking your grate dimensions before ordering. The cast iron grates are described as holding heat longer than standard steel, which can help with sear marks.
The trade-off is a narrow model match. This kit is built for a specific 5-burner family, so a grill with a different burner count will not fit neatly. The listing also currently shows the kit as unavailable, so check stock before planning a repair. Compared with the 4-burner kits below, it covers more parts but requires a closer model check.
Pros
- Covers grates, burners, heat tents, and igniters in a single order.
- Lists original part numbers for easier cross-checking.
- Stainless steel burners and heat tents.
- Cast iron grates are described as retaining heat well.
Cons
- Works only with a narrow range of 5-burner Charbroil models.
- Listed as currently unavailable.
Verdict: Choose this kit if you own a compatible 5-burner Charbroil Performance grill and need grates along with burner parts.
Uniflasy KitchenAid Kit: Best for KitchenAid 4-Burner Owners
The Uniflasy kit is designed for KitchenAid 4-burner gas grills, and the listing names a long set of model numbers in the 720 and 730 series. It packs four burners, four heat plates, four igniter electrodes, and hardware screws, so a full tune-up can be handled in one order. The listed burner size is 16 15/16 by 1 inch, and the heat plate is 16 1/8 by 3 1/4 inches, both in stainless steel.
The heat plates are meant to shield the burners from drips, which matters if grease tends to collect under the grates and feeds flare-ups. The listing also describes a smoother surface intended to spread heat more evenly. Because the igniter electrodes are included, this kit suits a grill where ignition trouble and uneven flames appear together.
The main caution is confirming your model. The list is long, and it also includes some Jenn-Air and Outdoor Gourmet fits, so measuring your existing burner is worth the extra minute. Compared with the Direct Store options, this kit is focused on KitchenAid compatibility rather than Charbroil.
Pros
- Includes burners, heat plates, igniter electrodes, and screws.
- Exact burner and heat plate dimensions are listed for checking fit.
- Covers many KitchenAid 4-burner models.
- Stainless steel burners and heat plates.
Cons
- Correct fit depends on matching your exact model number.
Verdict: This is a practical choice for KitchenAid 4-burner owners who want the burner, heat plate, and igniter parts replaced together.
Direct Store DG101 Kit: Best Cross-Referenced Charbroil Set
The DG101 kit is a Charbroil-focused set with four stainless steel burners, four porcelain steel heat plates, and three stainless steel carryover tubes. The listed burner size is 15 7/8 by 1 inch, and the heat plate is 16 by 3 13/16 inches. The crossover tubes are listed at 6 3/8 inches long, which gives you a reference point when you check the old parts.
The listing includes a long set of Charbroil model numbers and original part numbers for burners, heat shields, and crossover tubes. That cross-reference is helpful when a part number is worn off or hard to read. Cleaning is straightforward, since the listing suggests soaking the heat plates in hot water with detergent and then brushing them.
The main caution is the sheer number of model listings. The brand asks you to confirm size and quantity before ordering, so take time to match your original parts. Compared with the Criditpid and DG272 options, this kit has a broader part-number list, but its heat plates are porcelain steel rather than stainless.
Pros
- Four stainless steel burners and four heat plates in one set.
- Three carryover tubes included.
- Broad list of Charbroil models and original part numbers.
- Simple cleaning routine.
Cons
- The long compatibility list calls for careful checking.
- Porcelain steel heat plates rather than stainless steel.
Verdict: A good pick for Charbroil owners who can find their original part numbers and want a complete burner and heat plate set.
Criditpid Replacement Parts: Best for Targeted Charbroil Repairs
Criditpid takes a different approach from the other kits. Its listing covers Charbroil Performance models with 4, 5, and 6 burners, along with several infrared and TRU-Infrared models, which makes it one of the widest fit lists in this roundup. The parts described include a stainless steel heat tent measuring 15 1/2 by 1 3/8 inches, a stainless steel burner tube about 15 3/8 inches long, an adjustable crossover tube, a burner brace, and a temperature gauge part.
The main strength is flexibility. If only one or two components have failed, you do not need a full set of burners and heat plates, and this listing reflects that with several separate parts. The crossover tube adjusts from 5 to 9 inches, which helps when the original length is uncertain. The listing emphasizes stainless steel construction for rust resistance.
The trade-off is clarity. The listing does not state how many of each part comes in the package, so confirm quantities before ordering. Owners who need a complete burner and heat plate set may find the Direct Store kits easier to understand. This option is best viewed as a flexible parts collection rather than a single full kit.
Pros
- Covers several Charbroil families, including 4, 5, and 6 burner models.
- Separate parts allow targeted repairs.
- Crossover tube adjusts from 5 to 9 inches.
- Stainless steel heat tent and burner tube.
Cons
- Quantities of each part are not clearly stated.
Verdict: Pick this if you need to replace specific Charbroil parts and your grill appears on its wide compatibility list.
Direct Store DG272 Kit: Best for Charbroil Advantage 4-Burner Grills
The DG272 kit is designed for Charbroil Advantage 4-burner gas grills, and the listing names models including 463344116, 466344116, 463343819, 463280219, and 463280419. The package includes four burners, four heat plates, two igniters, and three adjustable crossover tubes. The heat plates are listed at 15 1/8 by 2 inches, and the crossover tubes adjust from 5 to 8.5 inches.
The igniters are a practical addition, since many burner kits leave ignition parts out. The listing also says the kit fits Charbroil Tru-Infrared two-burner models, which adds some flexibility. Quantity variations are offered, so you can choose the set that fits your grill. Cleaning follows the same simple routine of hot water, detergent, and a brush.
The trade-off is measuring. The listed burner size is written as 14 3/4 by 3/5 inches, an unusual format, so compare it with your old burner before buying. The kit also does not mention grates or hardware. Compared with the Uniflasy kit, this option is more focused on Charbroil Advantage models and includes igniters.
Pros
- Four burners, four heat plates, two igniters, and three crossover tubes.
- Adjustable crossover tubes for flexible fit.
- Igniters are included.
- Also lists fit for certain two-burner Tru-Infrared models.
Cons
- The burner size format needs careful measuring against your original part.
Verdict: A solid choice for Charbroil Advantage 4-burner owners who want burners, heat plates, and igniters replaced together.
How to Choose the Right Gas Grill Burner Kit
Confirm your exact grill model
Model matching is the most important step. Burner kits are built for specific grill families, and a burner that is even a few inches off can leave gaps or fail to line up with the gas valve. Look for the model number on the rating label, which is often inside the firebox or on the back of the cart. Then check that number against each kit’s compatibility list. Several kits here list many numbers, so compare carefully and do not rely on the brand name alone.
Count the burners and parts you actually need
Before you order, decide whether you need a full set or only a few parts. If one burner has rusted through while the others are fine, a single-burner or partial kit may be the better value. If every burner and heat plate looks worn, a full set saves time and avoids mixing old and new metal. Consider whether you also need grates, igniters, or crossover tubes. Kits such as the Yuflame and DG272 include igniters, while others focus only on burners and heat plates.
Compare materials and what they mean for upkeep
Burners and heat plates are exposed to heat, moisture, and grease, so material matters. Stainless steel is widely used for burners because it resists rust well. Porcelain steel heat plates, like those in the DG101 kit, are a different choice, and they may suit owners who prefer that finish. Cast iron grates, as in the Yuflame kit, hold heat well but need regular seasoning and dry storage to avoid rust. Choose the material that matches how often you grill and how you plan to clean.
Measure the burner and heat plate before buying
Burner length and heat plate size determine whether parts sit correctly in your grill. Remove the old burner, measure its length and diameter, and measure the heat plate width and height. Then compare these numbers with the dimensions in each listing. Some listings use unusual formats, such as fractions written in unexpected ways, so convert them carefully. A quick measurement can prevent a return and a second wait for delivery.
Check the crossover tubes and igniters
Crossover tubes carry flame from one burner to the next, so their length matters for even lighting. Adjustable crossover tubes, such as those in the Criditpid and DG272 options, can cover a range of lengths and reduce the risk of a poor fit. Igniter electrodes are another detail to check. If your igniter is clicking but the burners do not light, an igniter part may be the real problem, and a kit that includes igniters may save an extra order.
Think about cleaning and long-term maintenance
A replacement kit can last longer when you keep it clean and dry. Most listings suggest soaking heat plates in hot water with detergent, then brushing off grease. Keep parts dry during storage, especially cast iron grates and any parts that are not stainless. Also remember that heat plates protect burners from drips, so cleaning them regularly helps reduce flare-ups and keeps the flame even over time.
Frequently Asked Questions
How do I know which burner kit fits my grill?
Start with the model number on your grill’s rating label. Then compare it with the compatibility list in each kit listing. If the list does not include your exact model, measure your old burner and heat plate before buying. Dimension matching is a useful second check when model numbers are close but not identical.
Should I replace only the burners or the whole set?
Replace only what is damaged if the rest of the set is in good shape. If burners are rusted through but heat plates still look solid, a burner-only option may be enough. If several parts are worn, a full kit is usually simpler and helps keep the flame pattern consistent across all burners.
Do I need to replace the igniter at the same time?
Not always. Check whether the igniter clicks and produces a spark. If it does not, the igniter or its wiring may be the problem. Kits such as the Yuflame, Uniflasy, and DG272 include igniter parts, which can be useful if you suspect ignition trouble.
Are stainless steel burners better than other materials?
Stainless steel is generally a good choice for burners because it resists rust and corrosion. Porcelain steel heat plates are a different option and still offer protection from drips. The better choice depends on your grill, your climate, and how carefully you clean and store the parts.
Can I install a burner kit myself?
Many burner replacements are simple, but you should disconnect the gas supply and let the grill cool before starting. Remove the grates, heat plates, and old burners, then install the new parts in the same position. Check each burner for proper alignment and test the grill for even flames before cooking. If you are unsure about the gas connection, ask a qualified technician for help.
Why does my grill still have uneven flames after replacing the burners?
Uneven flames can come from a clogged burner port, a misaligned burner, a worn crossover tube, or a gas valve issue. Clean the burner ports first, confirm the burners sit correctly, and check that the crossover tubes connect properly. If the problem continues, the cause may lie outside the burner kit itself.
Final Recommendation
The best kit depends mostly on your grill model. If you own a 5-burner Charbroil Performance grill and want grates along with burner parts, the Yuflame kit is the most complete option. For KitchenAid 4-burner owners, the Uniflasy kit covers burners, heat plates, and igniters in one order. Charbroil owners who need a complete set with a long compatibility list should look at the Direct Store DG101, while Criditpid suits targeted repairs across several Charbroil families. If your grill is a Charbroil Advantage 4-burner model, the Direct Store DG272 is a practical choice that includes igniters. Measure your original parts, confirm the model number, and choose the kit that matches what actually needs replacing.